TurfLocal

Will my bed fit in my room?

Enter your room and a bed size. You get a yes or no, the space left on each side and at the foot, and a to-scale drawing.

Your room

How to use it

  1. Measure the two walls of the room, wall to wall, at floor level.
  2. Pick the bed size and how much walkway you want around it (24 inches is standard).
  3. Check the verdict and the drawing. The table shows every other bed size for the same room.

How it works

A bed fits comfortably when you can walk past it on every open side and at the foot. Designers usually allow 24 inches for a walkway, 30 inches for comfort and 36 inches for a roomy feel. The checker adds your headboard and frame to the mattress size, tries the headboard against each wall and keeps the better layout, then checks whether nightstands still fit beside it. The chart below runs the same check for common room sizes.

Which bed fits which room

The same check for common room sizes, with the checker's default settings: the mattress plus 2 inches of frame width and 4 inches of headboard and frame length, centered on whichever wall works better, no nightstands. Yes means at least 24 inches on both sides and at the foot, Tight means 18 to 24 inches, Cramped means less than 18. The number under each verdict is the tightest gap. Doors, closets and a dresser are not included, so check your own room in the tool above.

Room (ft)TwinFullQueenKingCal king
8x8Cramped17 inCramped17 inCramped12 inCramped9 inCramped8 in
8x10Yes28 inTight20 inCramped17 inCramped12 inCramped11 in
9x9Yes29 inYes26 inTight23 inCramped15 inCramped17 in
9x10Yes34 inYes29 inYes24 inTight21 inTight20 in
9x11Yes34 inYes29 inYes24 inYes24 inTight20 in
9x12Yes34 inYes29 inYes24 inYes24 inTight20 in
10x10Yes40 inYes32 inYes29 inTight21 inTight23 in
10x11Yes41 inYes38 inYes35 inYes27 inYes29 in
10x12Yes41 inYes41 inYes36 inYes33 inYes32 in
10x13Yes41 inYes41 inYes36 inYes36 inYes32 in
11x11Yes46 inYes38 inYes35 inYes27 inYes29 in
11x12Yes52 inYes44 inYes41 inYes33 inYes35 in
11x13Yes53 inYes50 inYes47 inYes39 inYes41 in
12x12Yes52 inYes44 inYes41 inYes33 inYes35 in

Examples

Questions

Will a king bed fit in a 10x12 room?

Yes, comfortably. With the headboard on the 12 ft wall, a king (76 x 80 in, about 78 x 84 in with a frame) leaves 33 inches on each side and 36 inches at the foot, and a 20-inch nightstand still fits on each side.

Will a king bed fit in a 10x10 room?

It fits, but tightly. A king with a frame leaves 21 inches on each side and 36 inches at the foot: wider than the 18-inch squeeze, narrower than the 24-inch standard walkway. A queen in the same room leaves 29 inches on each side.

What size bed fits in a 10x10 room?

A queen is the largest bed that keeps 24-inch walkways: 29 inches on each side and 36 inches at the foot. A full leaves 32 inches on each side. A king (21 inches) or a California king (23 inches) fits only tightly.

What size bed fits in an 8x10 room?

A twin or twin XL fits comfortably, with the headboard on the 8 ft wall and 28 inches on each side. A full fits tightly (20 inches on each side), and a queen leaves only 17 inches, less than the 18-inch squeeze.

What is the minimum room size for a queen bed?

About 9 x 10 ft. With the headboard on the 10 ft wall, a queen with a frame (about 62 x 84 in) leaves 29 inches on each side and 24 inches at the foot. A 10 x 10 ft room opens the foot to 36 inches. Both are before a dresser, a closet or a door swing.

What size room do you need for a king bed?

About 9 x 11 ft keeps 24-inch walkways: with the headboard on the 11 ft wall, a king with a frame leaves 27 inches on each side and 24 inches at the foot. A 10 x 12 ft room gives 33 inches at the sides and 36 inches at the foot. A California king (72 x 84 in) needs about 10 x 11 ft. Add room for a dresser or a door swing.

How much space should be around a bed?

24 inches is the usual minimum walkway, 30 inches is comfortable and 36 inches feels roomy. 18 inches is the narrowest most adults can squeeze through.

Does the bed frame change whether it fits?

Yes. Frames and headboards add a few inches, more for upholstered or sleigh beds. Enter yours in the frame field; 4 inches is a typical allowance.

Is a queen or a full bed better for a small room?

A full is 6 inches narrower and 5 inches shorter than a queen. In a room under 10 ft wide that difference often decides whether you keep a usable walkway on both sides.