TurfLocal

How many Christmas lights for my tree?

Enter your tree's height and shape and pick your strands. You get the number of lights and strands, how many to buy, and how many outlets the strands need.

How to use it

  1. Measure the tree from the bottom branches to the tip, without the stand. Pick its shape, or measure the widest point.
  2. Pick how bright you want it and the strands you have or plan to buy.
  3. Type the end-to-end limit from your strand's tag, and how many strands you already own.

How it works

Most guides say 100 lights per foot of height, but a pencil tree and a full tree of the same height are very different sizes. This calculator works from the outside of the tree as a cone, so width counts: a 7 ft pencil tree gets about 315 lights at the classic look, and a full 7 ft tree about 795. It splits the lights by thirds of the height, because the bottom third holds more than half of the tree's surface. Then it rounds up to whole strands and uses the end-to-end limit to work out how many separate plug-in points you need.

Examples

Questions

How many Christmas lights for a 7 foot tree?

For a standard 7 ft tree (about 50 in wide), about 650 lights for a classic look: 7 strands of 100. A soft glow is about 430 lights and a bright tree about 960. A slim 7 ft tree needs about 480, and a pencil tree about 315.

How many lights for a 7.5 ft tree?

About 750 lights for a standard 7.5 ft tree at the classic look, which is 8 strands of 100. That matches the common 100-lights-per-foot rule. For a bright tree it is about 1,110 lights (12 strands); for a soft glow about 500 (5 strands).

How many feet of lights for a 7 foot tree?

About 233 ft of LED mini lights (7 strands of 100 at 4 in spacing, 33 ft each), or about 146 ft of incandescent minis, which sit closer together at 2.5 in. The count of lights is what matters; the length follows from the spacing.

How many lights for a 6 foot tree?

About 480 lights for a standard 6 ft tree, 5 strands of 100. A 9 ft standard tree needs about 1,080 lights, 11 strands.

How many light strands can I connect end to end?

Check the tag on the strand. Incandescent mini sets usually stop at about 5 because of a 210 watt limit; LED sets often allow 17 to 45. The calculator uses 5 and 17 unless you type your own number, and tells you how many separate plug-in points you need.

Why does the bottom of the tree need more lights?

The tree is a cone, and its surface grows toward the base. The bottom third of the height is 5/9 of the surface, the middle third 3/9 and the top third only 1/9, so the calculator splits the lights in that ratio.