❄ TurfLocalFree tools for everyday projects

Buyer's checklist

What a good HVAC quote includes

The items a complete heat pump, air conditioner or furnace quote should show, the California rules on deposits and contracts, and the red flags worth a question before you sign.

Short answer. A complete HVAC quote names the brand and exact model number of every unit, shows a matched indoor and outdoor pair, says how the size was chosen, and spells out the permit, refrigerant lines, electrical work, removal of the old equipment, and the labor and parts warranty. In California the deposit cannot exceed $1,000 or 10% of the contract price, whichever is less, unless the contractor has a blanket performance and payment bond on file with CSLB. The federal 25C tax credit ended for equipment placed in service after December 31, 2025, so a quote that promises it needs a question.

Contractor lookup has ended

TurfLocal no longer lists HVAC contractors. Already have a quote? Check it free with HVAC Quote Check. More free tools: all TurfLocal tools.

The checklist

What the quote should showWhy it matters
Brand and exact model number of every unitWithout model numbers you cannot compare two quotes or check an efficiency rating.
A matched indoor and outdoor pair, with its AHRI certificate numberEfficiency ratings apply to a specific combination. The AHRI directory lists certified matches.
How the size was chosenA room-by-room load calculation (ACCA Manual J) is the standard method. Matching the old unit's size is a common way to end up oversized.
The permit: who pulls it, and whether the fee is includedCSLB's checklist asks whether the contract requires the contractor to get any needed permits before work starts, and whether the fees are included.
Refrigerant type and the line setNew systems use R-454B or R-32. R-410A units are older stock; ask when they were made. Ask whether the refrigerant lines are replaced or reused.
Electrical workA new outdoor unit can need a breaker, a disconnect or panel work. The quote should say whether it is included.
Removal and disposal of the old equipmentIncluding recovery of its refrigerant.
Labor warranty, parts warranty, and who registers itManufacturer warranties usually cover parts only, and many require registration within a set time after installation.
Payment termsIn California the down payment is limited, and CSLB advises paying only as work is completed (below).
The contractor's license numberCheck it is active, and that it covers HVAC work (classification C-20), on the CSLB license check.
Start and completion datesCSLB's checklist asks whether the contract says when work will start and end.

California rules on deposits and contracts

Deposit. For home improvement work, CSLB says the down payment should be "no more than 10% of the contract price or $1,000, whichever is less". The exception is a contractor with a blanket performance and payment bond on file with CSLB. Sources: CSLB's homeowner checklist and its bulletin on payment limits.

Payments. If there is a schedule of payments, CSLB advises paying only as work is completed, not before.

Notices. CSLB's checklist asks whether the 3-day right to cancel applies to you (5 days if you are 65 or older), and whether the contractor gave you a Notice to Owner, the warning about mechanics liens.

Changes. Changes or additions to a contract must be in writing.

Red flags worth a question

  • A deposit above the California limit without a blanket bond on file with CSLB.
  • A federal tax credit used as a selling point. The 25C credit ended for equipment placed in service after December 31, 2025 (Public Law 119-21). Our heat pump incentives checker shows what is still open.
  • "Price good today only." A fair offer stays open long enough for a second quote.
  • Open-ended wording such as "as needed", "if required", "allowance" or "TBD" without an amount.
  • No model numbers, or an outdoor unit with no indoor coil or air handler listed.

Check your quote in about a minute

Check my quote free →

Upload the quote as a PDF or a photo. HVAC Quote Check runs this checklist for you: it reads the equipment and scope off the quote, applies the California rules above, checks the contractor's license against the CSLB register, and gives you the questions to send. It does not judge the price. See a sample report.

FAQ

Common questions

How much deposit can an HVAC contractor ask for in California?

For home improvement work, no more than $1,000 or 10% of the contract price, whichever is less, according to CSLB. The exception is a contractor with a blanket performance and payment bond on file with CSLB.

Should an HVAC quote include a permit?

Replacing a furnace, air conditioner or heat pump usually needs a permit from your city or county. CSLB's checklist asks whether the contract requires the contractor to get any needed permits before work starts and whether the fees are included.

Is there still a federal tax credit for a heat pump?

Not for equipment placed in service after December 31, 2025. Public Law 119-21 ended the 25C credit at that date.

Can a contractor still install R-410A equipment?

New R-410A residential split systems can no longer be manufactured. Trade press reports that EPA's 2026 rule lets existing stock still be installed, so ask when the unit was made and whether an R-454B or R-32 model is available.

How do I check an HVAC contractor's license in California?

Use the CSLB license check and look for an active license with the C-20 classification, which covers heating and air conditioning work. HVAC Quote Check does this for California quotes automatically.